With a 3.0MP live resolution and USB 3.0 interface, the Moticam 3+ can display high-resolution images at the fastest data transfer speeds. The Moticam 3+ is adaptable to any trinocular microscope with the right C-mount adapter. Easy to set up and simple to use, just mount the camera, and start displaying your high-resolution images with a few simple clicks.


Model Moticam 3+ 
Sensor type CMOS
Sensor size 1/2"
Imaging area 6.55x4.92mm
Capture resolution  3MP
Live display mode through USB 2048x1536, 1024x768, 512x384 pixels
Pixel size 3.2x3.2µm
Scan mode Progressive
Transfer USB 3.0
Max. frames per second (fps) 2048x1536 @ 12 fps, 1024x768 @ 30 fps , 512x384 @ 50 fps
Exposure time 0.11 msec to 7 sec
Operating temperature  From -10 to +60 Degrees Celsius non condensing
Max. signal to noise ratio 43dB
Dynamic range 61dB
Sensitivity  1.0V/Lux-sec (550nm)
Support device TWAIN, SDK and Direct Show Driver
Supported OS Windows XP SP3/Vista/7/8/10 and MAC OSX, Linux
Minimum computer requirements  2GHz dual core - RAM memory 2GB - Video memory min. 512 MB
Lens mount C-Mount
Focusable lens  16mm
Software  Motic Images Plus 3.0

Still image and video capture, live and still image measurmenets, image

adjustments (RGB/Gain/Enhance/Brightness), automatic & manual

white balance, automatic & manual exposure, individual objective calibration

system, Motic report

Power supply  5V (USB supply)
Package includes CS ring adaptor, focusable lens, 30mm and 38mm eyepiece adapters, USB 3.0 cable, Motic 4 dot calibration slide, macro tube, Motic Images Plus 3.0 PC/OSX/Linux

Moticam 3+ USB 3.0 Camera

SKU: 1100600100791